Bauknecht TK Platinum 1083 I Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 27)

1. Before starting the setup procedure take note

of your home wireless network name (SSID), its

PASSWORD and the SAID code of the dryer.

2. Turn on your router and make sure the

Internet connection is working.

3. Press the Remote Control button. It will

operate as a shortcut to the Live menu.

Otherwise select the Live menu from the

Setting menu using the UP and DOWN key

and press the OK key.

4. Select the Setup feature from the Live

menu using the UP and DOWN key and press

the OK key.

The dryer will create a wireless network (SSID).

The network name is made up of the prex

"WP_" followed by the MAC address (e.g.

WP_88_A1_23_6F_78_C3).

The Connection Status indicator starts

blinking fast.

5. Turn on the WiFi on your smart device.

6. Look within your device for the wireless

network (SSID) of the dryer and select it. It will look

WP_XX_XX_XX_XX_XX_XX

where "XX" are letters and numbers.

Each appliance has its own SSID.

7. Once you have selected the SSID, a password

will be required. Use the SAID (see "Before starting

the setup process", point 3) as network password,

without the rst three characters.

SAID: __ __ __ __ __ __ __ __ __ __ __ __ __

8. Wait until your device conrms to be

connected to the WP network.

9. Open your favourite browser with your device

and type 192.168.10.1 in the address bar.

10. Press "Enter"/"Go". The browser displays a

SMART web page. It is the conguration page of

the WiFi radio of your dryer.

11. Select your home WiFi network in the

pulldown list of the available networks.

If your home wireless network is hidden, select

“Other”( ->) and manually enter the network name

(SSID) and the security protocol.

12. Enter the password of your WiFi network.

Remember: this kind of passwords are case sensiti-

ve.

13. Click “Submit” and wait for 30 seconds.

14. The Connection Status indicator

starts blinking slow as the connection with

the router is established. As the Connection

Status indicator becomes steady, the connection

has been established and the dryer is connected to

the Internet.

15. The setup procedure is complete.

MANUAL SET UP PROCEDURE

This procedure uses the Micro Access Point technology

and is applicable if your router does not support WPS 2.0.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht TK Platinum 1083 I Gebrauchs- und Pflegeanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wäschetrockner Bauknecht TK Platinum 1083 I