Bauknecht CTDI K 940C NE Bedienungsanleitung PDF herunterladen (Seite 42)

Appliance description

3.1 Operating the hob with the sensor keys

The glass ceramic hob is operated with touch control sen-

sor keys. The sensor keys are operated as follows: lightly

touch a symbol on the surface of the ceramic glass plate. A

buzzer will indicate when the controls have been operated

correctly.

The touch control sensor key will then be indicated as

“key”.

Standby key

(7)

This key is used to switch the entire hob operational. It is,

as it were, the main switch. When the hob has been swit-

ched oﬀ with this key, it will remain on standby for approx.

another 120 min.

Attention! The residual heat indicator will no longer operate

when the appliance has completely switched oﬀ .

ON/OFF key (8) Cooking zones left or right

This key is used to switch the respective cooking hob side

left or right on and oﬀ .

Power setting display (10)

The power setting indicator shows the power setting which

has been selected, or:

...................Residual heat

...................Power boost

...................Pan recognition

...................Automatic boost function

...................Stop function

....................Keep-warm function

....................Control panel lock

Symbols

..........Keep-warm levels 42°C/ 70°C/ 94°C

...................Timer function, automatic switch-oﬀ device

...................Minute minder

..................Bridging function

Lock key (11)

The lock key can be used to lock all of the keys.

Keep warm key (12)

For melting, holding and simmering

Power boost in the sensor ﬁ eld

The power boost setting makes additional power available

for induction cooking zones.

Stop key (14)

The STOP function can be used to brieﬂ y stop the cooking

process.

Recall function (14) (recovery function)

The most recent setting can be recovered if the hob is

switched oﬀ unintentionally.

Minus key /Plus key Ventilation (20)

With this keys the power levels of the fan are selected and

the fan run is set.

3.2 Worth knowing about the slider (sensorﬁ eld)

In principle, the slider functions the same as the touch

controls; the only diﬀ erence is that you can put your ﬁ nger

on the glass ceramic surface and then move it around.

The sensor ﬁ eld recognises this movement and raises or

lowers the display setting (power level) in accordance with

the movement.

The term sensor ﬁ eld is used to mean slider from now on.

What must be observed when operating sensor ﬁ elds?

Your ﬁ nger should not be placed ﬂ at onto the glass cera-

mic surface in order to avoid adjacent keys/sensor ﬁ elds

from reacting by mistake.

Press the sensor ﬁ eld lightly or move your ﬁ nger

around

You can press the sensor ﬁ eld very lightly with your ﬁ nger;

when this is done the setting on the display (power level)

will gradually change.

When you put your ﬁ nger on the sensor ﬁ eld and then

move it to the left or right, the display setting will change

progressively.

The faster the movement, the faster the change in the

display.

Sensor ﬁ eld

unsuitable right

touch move

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht CTDI K 940C NE Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Bauknecht CTDI K 940C NE