Bauknecht WM Big 1224 ZEN KON Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 6)

6

Wear protective gloves for

cleaning and maintenance.

The appliance must be

disconnected from the

power supply before any

maintenance operation.

on a sheet of plywood at least

60 x 60 cm wide/ deep and

at least 3 cm thick which is

secured to the oor.

Use only new hoses to connect

the appliance to the water

supply. Used hoses must

not be used and should be

discarded.

Move the appliance without

lifting it by the worktop.

Connect the water inlet

hose(s) to the water supply

in accordance with the

regulations of your local water

company.

For models dedicated only for

cold water: Do not connect to

the hot water supply

For models with hot ll: the

hot water inlet temperature

must not exceed 60 °C.

Make sure that the ventilation

openings in the base of your

washing machine (if available

on your model) are not

obstructed by a carpet or other

material.

The supply water pressure

must be in range 0.1 -1 MPa.

If you want to place a dryer

on top of your washing

machine, rst contact our

After-Sales Service or your

specialist dealer to verify if

this is possible. This is only

admitted if the dryer is xed

on the washing machine by

using an appropriate stacking

kit available through our After-

Sales Service or your specialist

dealer.

ELECTRICAL WARNINGS

For installation to comply with

current safety regulations,

an omnipolar switch with

minimum contact gap of

3 mm is required and the

appliance must be earthed.

If the power cable is damaged,

replace with an identical one.

The power cable must only

be replaced by a qualied

technician in compliance with

the manufacturer instruction

and current safety regulations.

Contact an authorized service

center.

If the tted plug is not suitable

for your socket outlet, contact

a qualied technician.

The power cable must be

long enough to connect the

appliance, once tted in its

housing, to the main power

supply. Do not pull the power

supply cable.

Do not use extension leads,

multiple sockets or adapters.

Do not operate this appliance

if it has a damaged mains

cord or plug, if it is not

working properly, or if it has

been damaged or dropped.

Keep the cord away from hot

surfaces.

The electrical components

must not be accessible to the

user after installation.

Do not touch the appliance

with any wet part of the body

and do not operate it when

barefoot.

CORRECT USE

Do not exceed the maximum

load allowed. Check the

maximum load allowed in the

programme chart.

Turn o the tap when not in

use.

Do not use any solvents

(e.g. turpentine, benzene),

detergents containing solvents,

scouring powder, glass or

general purpose cleaners,

and ammable uids; do not

machine wash fabrics that have

been treated with solvents or

ammable liquids.

CLEANING AND

MAINTENANCE

Never use steam cleaning

equipment.

1 2 3 4 5 6 7 8 9 10 11 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare