Bauknecht WAPC 88540 Betriebsanweisung PDF herunterladen (Seite 3)

4. SWITCH ON WASHING MACHINE

• Press the On/O button until the programme button

lights up. An animation appears, and there is a sound.

Afterwards the washing machine is ready to be operated.

5. SET THE DESIRED PROGRAMME

GUIDED MODE  the button light guides you through setting your

programme in the following order: selection of programme /

temperature / spin speed / options. As soon as you conrm a

selection by pressing the knob, the button light will jump to the

next step.

• Select programme:

Make sure that the programme button lights up. Turn the

knob to select the desired Programme.

Programme name and duration appear on the display.

Conrm the desired programme by pressing the knob. The

maximum possible laundry load for the selected programme is

indicated after a few seconds.

• Change temperature, if needed

If you want to change the temperature indicated over the

temperature button, make sure that the Temperature button

lights up.

Turn the knob to select the desired temperature, then press the

knob to conrm.

• Change spin speed, if needed

If you want to change the spin speed indicated over the

Spin button, make sure that the Spin button lights up.

Turn the knob to select the desired spin speed, or Rinse hold,

then press the knob to conrm.

• Select options, if needed

Make sure that the options button lights up. The options

which are selectable for your programme are indicated by

lighting arrows.

Turn the knob to select the desired options. The symbol of the

selected option blinks. To conrm it, press the knob.

Some options / functions can be selected by directly pressing the

button:

Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more

information.

INDIVIDUAL MODE

After you have switched on the washing machine, you are not

forced to follow the GUIDED MODE.

It is up to you which order you choose to set your programme. To do

a setting, rst press the relevant button, then turn the knob to

select, and nally press the knob to conrm.

The range of temperatures, spin speeds and options depend on the

programme selected. Therefore it is recommended to start your

setting with selecting the programme.

6. ADD DETERGENT

• If you do not use the Dosing Aid function, pull out the

detergent dispenser and add detergent (and additives/

softener) now, as indicated in section DETERGENT

DISPENSER.

Observe the dosing recommendations on the detergent pack. If

you have selected PREWASH or FINISH IN, observe the

recommendations in section OPTIONS, FUNCTIONS AND

INDICATORS. Afterwards carefully close the detergent dispenser.

• If you use the “Dosing Aid” function, add detergent later, after

you have started the programme. Refer to section OPTIONS,

FUNCTIONS AND INDICATORS.

• After having added detergent /additives, do not open the

detergent dispenser anymore, to avoid overow.

7. START PROGRAMME

• Press and hold “Start/Pause” until the button lights up

solidly; the programme starts.

• If you have selected “Dosing Aid”, the washing machine will

indicate you the recommended detergent amount for your

laundry load after programme start. Follow the instructions as

indicated in section OPTIONS, FUNCTIONS AND INDICATORS /

Dosing Aid.

8. CHANGE A RUNNING PROGRAMME, IF NEEDED

You can still change the settings while a programme is running. The

changes will be applied, provided the respective programme phase

has not nished yet.

• Press the relevant button (for example the “Spin speed” button to

change the spin speed). The value blinks for a few seconds.

• While blinking, you can adjust the setting by turning the knob. If

the value stopped blinking, press the button again.

• Press the knob to conrm the modication. If you do not conrm,

the modication is conrmed automatically – the modied setting

stops blinking

The programme will continue automatically.

To change the settings of a running programme, you can also

• Press “Start/Pause” to put the running programme on pause

• Change your settings

• Press “Start/Pause” again to continue the programme.

9. PAUSE A RUNNING PROGRAMME AND OPEN THE

DOOR, IF NEEDED

• Press and hold “Start/Pause” to pause a running

programme.

• Provided water level is not too high, or laundry is not too hot, the

door indicator lights up. You can open the door, for example

to add/remove laundry.

• Close the door again and press “Start/Pause” to proceed

with the programme.

10. RESET A RUNNING PROGRAMME, IF NEEDED

• Press and hold the “On/O” button until the display

indicates that the programme is cancelled.

The water drains, the programme ends and the door

unlocks.

11. SWITCH OFF THE WASHING MACHINE AFTER

PROGRAMME END

• The display indicates that the cycle is nished, and the

“Door open” indicator lights up – you can take out your laundry

• Press “On/O” to switch o the washing machine. If you do not

switch it o, the washing machine will switch o automatically

after about a quarter of an hour after programme end, to save

energy.

• Leave the door ajar, so that the inside of the washing machine can

dry.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht WAPC 88540 Betriebsanweisung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht WAPC 88540