Bauknecht WA Platinum 882 Betriebsanweisung PDF herunterladen (Seite 2)

HOW TO USE THE APPLIANCE

Press the On/O button until the programme button lights up. An

animation appears, and there is a sound. Afterwards the washing

machine is ready to be operated.

Select programme

Make sure that the programme button lights up. Turn the knob to

select the desired Programme.

Programme name and duration appear on the display.

Conrm the desired programme by pressing the knob. The maximum

possible laundry load for the selected programme is indicated after a

few seconds.

Change temperature, if needed

If you want to change the temperature indicated over the temperature

button, make sure that the Temperature button lights up.

Turn the knob to select the desired temperature, then press the knob

to conrm.

Change spin speed, if needed

If you want to change the spin speed indicated over the Spin button,

make sure that the Spin button lights up.

Turn the knob to select the desired spin speed, or Rinse hold, then

press the knob to conrm.

Select options, if needed

Make sure that the options button lights up. The options which are

selectable for your programme are indicated by lighting arrows.

Turn the knob to select the desired options. The symbol of the selected

option blinks. To conrm it, press the knob.

Some options / functions can be selected by directly pressing the

buttons on "Control Panel" from #3 to #7.

Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more

information.

INDIVIDUAL MODE: After you have switched on the washing machine,

you are not forced to follow the GUIDED MODE.

It is up to you which order you choose to set your programme. To do

a setting, rst press the relevant button, then turn the knob to select,

and nally press the knob to conrm.

The range of temperatures, spin speeds and options depend on the

programme selected. Therefore it is recommended to start your

setting with selecting the programme.

Add detergent

If you do not use the Dosing Aid function, pull out the detergent

dispenser and add detergent (and additives/ softener) now, as

indicated in section DETERGENT DISPENSER.

Observe the dosing recommendations on the detergent pack. If you

have selected PREWASH or FINISH IN, observe the recommendations in

section OPTIONS, FUNCTIONS AND INDICATORS. Afterwards carefully

close the detergent dispenser.

If you use the “Dosing Aid” function, add detergent later, after you have

started the programme. Refer to section OPTIONS, FUNCTIONS AND

INDICATORS.

After having added detergent/ additives, do not open the detergent

dispenser anymore, to avoid overow.

Start programme

Press and hold “Start/Pause” until the button lights up solidly; the

programme starts.

If you have selected “Dosing Aid”, the washing machine will indicate

you the recommended detergent amount for your laundry load after

programme start. Follow the instructions as indicated in section

OPTIONS, FUNCTIONS AND INDICATORS / Dosing Aid.

Change a running programme, if needed

Press the relevant button (for example the “Spin speed” button to

change the spin speed). The value blinks for a few seconds.

While blinking, you can adjust the setting by turning the knob. If the

value stopped blinking, press the button again.

Press the knob to conrm the modication. If you do not conrm, the

modication is conrmed automatically – the modied setting stops

blinking.

The programme will continue automatically.

To change the settings of a running programme, you can also:

• Press “Start/Pause” to pause the running programme.

• Change your settings.

• Press “Start/Pause” again to continue the programme.

Pause a running programme and open the door, if needed

• Press and hold “Start/Pause” to pause a running programme.

• Provided water level is not too high, or laundry is not too hot, the

door indicator lights up. You can open the door, for example to

add/remove laundry.

• Close the door again and press “Start/Pause” to proceed with the

programme.

Reset a running programme, if needed

Press and hold the “On/O” button until the display indicates that the

programme is cancelled.

The water drains, the programme ends and the door unlocks.

Switch o the washing machine after programme end

The display indicates that the cycle has ended, and the “Door open”

indicator lights up - you can take out your laundry.

Press “On/O” to switch o the washing machine. If you do not switch

it o, the washing machine will switch o automatically after about a

quarter of an hour after programme end, to save energy.

Leave the door ajar, so that the inside of the washing machine can dry.

CONSUMPTION DATA (approximate values**)

Programme

Temper-

ature

(°C)

Load

(Kg)

Water

(L)

Energy

(Kwh)

Duration (h:min)**

Moisture

content (%)**

Without

rapid

With

rapid

Mixed 40 4.0 48 0.40 01:00 00:55 55

Cotton 95 Max 86 2.60 02:40 -- 55

Cotton 60 Max 80 1.50 02:30 01:50 55

Cotton 40 Max 62 1.00 03:30 02:10 55

Synthetics 60 3.0 48 1.00 02:20 01:20 35

Synthetics 40 3.0 45 0.70 02:20 01:20 35

Eco Cotton

60 Max 42 0.49 06:00 04:00 53

Eco Cotton

60 4.0 31 0.39 04:00 -- 53

Eco Cotton

40 4.0 31 0.37 04:00 -- 53

Values measured in normal conditions in accordance with

IEC / EN60456. Water, energy and remaining moisture content values

refer to the default setting of the programmes, without options.

max = maximum load capacity of the washing machine

Eco Cotton is the standard programme for washing normally soiled

cottons, and it is the most ecient programme in terms of combined

water and energy consumption. For reasons of energy saving, the real

water temperature may deviate from the specied cycle temperature.

Power consumption in o-mode is 0.25W/in left-on mode 0.25W.

* Duration indicated after load sensing

Acoustic values on declaration label refer to appliance after complete

installation, with adhesive pads xed on bottom of washing machine

according to separate instructions.

OPTIONS, FUNCTIONS AND INDICATORS

Refer to the Programme Chart to check if options are available for the

selected programme.

OPTIONS WHICH ARE SELECTABLE BY PRESSING THE OPTIONS

BUTTON

Colours 15°

Helps to preserve the colours of your laundry by washing it with cold

water (15°C). Saves energy for water heating, while keeping a good

wash result. Suitable for lightly soiled coloured laundry without stains.

Make sure that your detergent is suitable for cold wash temperatures

(15 or 20°C). Not selectable for Cotton 95°.

Fresh Care

Helps to keep your laundry fresh if you cannot unload it soon after

programme end. The washing machine will start to tumble the laundry

periodically a short time after programme end. This tumbling will last

up to approximately 6 hours after end of your wash programme. You

can stop it at any time by pressing any button; the door unlocks and

you can take out your laundry.

Prewash

Helps to clean heavily soiled laundry by adding a prewash phase to

the wash programme selected. Extends the programme by about 20

minutes. Add detergent to the prewash compartment of the detergent

dispenser as well, or directly into the drum. Use powder detergent

for the main wash in order to ensure that the detergent stays in the

detergent dispenser until the start of the main wash phase.

Hot Finish

The programme ends with a warm rinse phase. This relaxes the bres

of your laundry, and the laundry feels comfortably warm when taking it

out a short time after programme end.

Bio Stains 15°

Helps to remove all kinds of stains, except grease/oil. The programme

begins with a cold water wash phase. Extends the programme by

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht WA Platinum 882 Betriebsanweisung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht WA Platinum 882