Bauknecht WA 43510 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 21)

39

The water is not pumped

out of the washing

machine.

An acoustic signal sounds and

the notice “FP

” appears in the

display.

Switch off the washing machine

and pull out the mains plug.

Check whether:

•

The drain hose is kinked (see

“Installation/Connect the

water drain hose”);

•

The pump or the filter is

blocked (see “Removing the

Filter”).

IMPORTANT:

Before

emptying ensure that the

water has cooled down.

•

The water in the drain hose is

frozen.

Reconnect the appliance to the

electrical socket.

Switch the washing machine on

again, select a programme and

start the appliance. To rinse the

laundry, we recommend a short

programme without the

addition of detergent.

If the fault occurs again, please

contact After Sales Service (see

“After Sales Service”).

There is a fault in an

electrical component.

An acoustic signal sounds and a

notice from “F4

” to “F16”

appears in the display.

•

Press the “Reset” button. The

programme will start again.

•

If the fault occurs again, please

contact After Sales Service (see

“After Sales Service”).

There is a fault in the

“Water Stop”.

An acoustic signal sounds, the

notice “Overdosing

” or “FA”

appears in the display and the

pump operates.

This fault can be triggered by:

1.

Excess foaming;

2.

A leak in the washing machine.

In this case the pump is switched

on automatically in order to

pump out the water.

Switch the washing machine off,

pull out the mains plug and turn

the water tap off. Tilt the

appliance forwards carefully to

allow the collected water to

drain out of the appliance base.

Then:

1.

Reinsert the mains plug in the

socket.

2.

Turn the water tap on [if water

immediately flows into the

appliance again, without the

appliance being started, there

is a fault. Turn the tap off and

notify After Sales Service, see

“After Sales Service”).

3.

Switch the washing machine

on again, select the desired

programme and start the

appliance.

If the fault occurs again, please

contact After Sales Service (see

“After Sales Service”).

1 2 ... 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare