Bauknecht WA ECO 7180 Betriebsanweisung PDF herunterladen (Seite 3)

3. OPEN THE WATER TAP

4. SWITCH ON THE WASHING MACHINE

• Press the “On/O” button until the programme button

lights up. An animation appears on the control panel and

the appliance plays a sound. The washing machine is then

ready for operation.

5. SET THE DESIRED PROGRAMME

GUIDED MODE  the button light will guide you through setting

your programme in the following order: Selection of programme/

temperature/spin speed/options. As soon as you conﬁrm a selection

by pressing the knob, the button light jumps to the next step.

• Select programme:

Make sure that the programme button lights up.

Turn the knob to select the desired programme.

The indicator next to the selected programme lights up.

Conﬁrm the desired programme by pressing the knob.

• Change temperature, if required

If you want to change the temperature indicated on the

display, make sure that the Temperature button lights up.

Turn the knob to select the desired temperature, then press the

knob to conﬁrm.

• Change spin speed, if required

If you want to change the spin speed indicated on the

display, make sure that the Spin button lights up.

Turn the knob to select the desired spin speed, or Rinse hold, then

press the knob to conﬁrm.

Refer to OPTIONS, FUNCTIONS AND INDICATORS for more

information.

• Select options, if required

If you want to select additional options, make sure that the

Options button lights up. The options which are selectable for

your programme are indicated by the arrows which are lit up

Turn the knob to select the desired options. The symbol for the

selected option will ﬂash. Press the knob to conﬁrm.

Some options/functions can be selected by pressing the button

directly:

Refer to the OPTIONS, FUNCTIONS AND INDICATORS section for

more information.

INDIVIDUAL MODE

After you have switched on the washing machine, you are not

forced to follow the GUIDED MODE.

The order in which you choose to set your programme is up to you.

To make a setting, ﬁrst press the relevant button, then turn the knob

to select, and ﬁnally press the knob to conﬁrm.

The range of temperatures, spin speeds and options depend on the

programme selected. It is therefore recommended that you start by

selecting the programme.

6. ADD DETERGENT

• If you are not using the Dosing Aid function, pull out the

detergent dispenser and add detergent (and additives/

softener) now; observe the dosing recommendations on

the detergent pack.

If you have selected PREWASH or START DELAY, observe the

recommendations in the OPTIONS, FUNCTIONS AND INDICATORS

section. Then carefully close the detergent dispenser.

• If you are using the “Dosing Aid” function, add detergent later,

after you have started the programme. Refer to the OPTIONS,

FUNCTIONS AND INDICATORS section for more information.

• After having added detergent/additives, do not open the

detergent dispenser to avoid any overﬂow.

7. START PROGRAMME

• Press and hold “Start/Pause” until the button lights up and

stays on; the programme will start.

• If you have selected “Dosing Aid”, the washing machine

indicates the recommended detergent amount for your laundry

load after the programme starts.

Follow the instructions as indicated in the OPTIONS, FUNCTIONS

AND INDICATORS/Dosing Aid section.

8. CHANGE THE SETTINGS OF A PROGRAMME WHICH IS

RUNNING, IF REQUIRED

You can still change the settings while a programme is running.

The changes will be applied, provided the respective programme

phase has not yet ﬁnished.

• Press the relevant button (for example the “Spin speed” button to

change the spin speed). The selected value will ﬂash for a few

seconds.

• While it is ﬂashing, you can adjust the setting by turning the knob.

If the value stops ﬂashing before you have adjusted it, press the

button again.

• Press the knob to conﬁrm the new setting. If you do not conﬁrm it,

the new setting will be conﬁrmed automatically: It will stop

ﬂashing.

The programme will continue automatically.

To change the settings of a programme which is running, you can

also:

• Press “Start/Pause” to pause the programme which is running

• Change the settings as desired.

• Press “Start/Pause” again to continue the programme.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht WA ECO 7180 Betriebsanweisung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht WA ECO 7180