Bauknecht TRPC 76520 Betriebsanweisung PDF herunterladen (Seite 3)

4. SET THE DESIRED PROGRAMME

GUIDED MODE  the button light will guide you through setting

your programme in the following order: selection of programme /

drying time (ONLY if Drying time or Airing programme is selected) /

dryness level (only if selectable/adjustable) / options. As soon as you

conrm a selection by pressing the knob, the button light will jump

to the next step.

• Select programme:

Make sure that the programme button lights up.

Turn the knob to select the desired programme. The indicator next

to the selected programme lights up. Conrm by pressing the knob.

Programme position oers a choice of special programmes,

which you can select by turning the knob; afterwards press the

knob to conrm the selected programme.

Find more information regarding programmes in the Programme

Chart.

• Select Drying time, if needed

ONLY if you have selected programme Drying time or

Airing, you can set the desired drying / airing time from a minimum

of 10 minutes to maximum 180 minutes (three hours).

Make sure that the Drying time button lights up. Turn the knob to

select the desired drying / airing time. Conrm it by pressing the

knob.

• Set dryness level, if needed

If you want to change the dryness level, make sure that the

Dryness level button lights up. Turn the knob to select the desired

dryness level, then press the knob to conrm.

• Select options, if needed

• If you want to select additional options, make sure that the

options button lights up. The options which are selectable

for your programme are indicated by lighting arrows

Turn the knob to select the desired options. The symbol of the

selected option blinks. To conrm it, press the knob.

Some options / functions can be selected by directly pressing the

button:

Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more

information.

INDIVIDUAL MODE

After you have switched on the dryer, you are not forced to follow

the GUIDED MODE.

It is up to you which order you choose to set your programme. To do

a setting, rst press the relevant button, then turn the knob to

select, and nally press the knob to conrm.

The variety of options and dryness levels depends on the

programme selected. Therefore it is recommended to start your

setting with selecting the programme.

5. START PROGRAMME

• Press and hold Start/Pause until the button lights up solidly;

the drying process starts.

• The duration can be recalculated and adapted in the course of

the programme. During such phases, an animation occurs on the

display.

6. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF

NEEDED

You can still change some settings after a programme was started:

Adjust drying time (only if programme Drying time or Airing is

selected):

Adjust or cancel “Finish in”, if a delay was selected and started

Add or cancel an option, provided the progress of the programme

still allows it.

• Press the relevant button. The selected setting will blink for a few

seconds.

• While blinking, you can adjust the setting by turning the knob. If

the value or setting stopped blinking, press the button again.

• Press the knob to conrm the modication. If you do not conrm,

the modication will be conrmed automatically – the modied

setting will stop blinking.

The programme will continue automatically.

To change the settings of a running programme or delay, you can

also:

• Press Start/Pause to put the running programme on pause

• Change your settings

• Press Start/Pause again to continue the programme.

7. RESET A RUNNING PROGRAMME, IF NEEDED

• Press and hold the On/O button until the display indicates

that the programme is cancelled.

8. SWITCH OFF THE DRYER AFTER PROGRAMME END

• The display indicates that the cycle has nished. Press On/

O to switch o the dryer. Open the door and take out your

laundry.

• The dryer will switch o automatically in about a quarter of an

hour after programme end, to save energy.

• If not switched o right after programme end, the dryer will

tumble the laundry for about 10 minutes, to prevent creasing.

The display shows an animation.

9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN

BOTTOM FILTER

• Refer to section CARE AND MAINTENANCE.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht TRPC 76520 Betriebsanweisung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wäschetrockner Bauknecht TRPC 76520