Bauknecht GSFP 3988-1 SG Bedienungsanleitung PDF herunterladen (Seite 37)

How to fill the salt container

From a water hardness

category of 1-2 (medium),

before using the dishwasher

for the first time, fill the salt

container with regeneration

salt (to find out the hardness

level of water in your area,

contact your local Water

Board or check the last bill

you received).

If the water hardness level

does not correspond to

position 3 on the selector

(factory setting) or if the

water hardness level changes:

Turn the selector to the

correct position (for

dishwashers without salt

sensor only):

Set the water hardness by

turning the selector (if fitted)

inside the door (top left) using

a screwdriver. Use the table

below to set the dial to the

correct setting:

Hardness

level

German

degrees

°dH

French

degrees

°fH

mmol/l Clarke scale

or English

degrees

°eH

Adjusting

the water

hardness

level selector

For dishwashers without salt sensor

only! In appliances provided with a salt

sensor, the selector automatically turns

to the correct position.

1 soft 0 - 5 0 - 9 0 - 0.9 0 - 6.3 0

1 - 2 medium 6 - 10 10 - 18 1.0 - 1.8 7 - 12.6 1

2 medium 11 - 15 19 - 27 1.9 - 2.7 13.3 - 18.9 2

3 medium-

hard

16 - 21 28 - 37 2.8 - 3.7 19.6 - 25.9 3

4 hard 22 - 28 38 - 50 3.8 - 5.0 26.6 - 35 4

4 very hard 29 - 35 51 - 63 5.1 - 6.3 35.7 - 44.1 5

4 extremely

hard

36 - 60 64 - 107 6.4 - 10.7 44.8 - 74.9 6

If the water hardness level falls within

category 1 (soft), no salt is required.

How to fill the salt

container:

Warning: Only use

regeneration salts for

use in domestic

dishwashers!

Do not fill the salt

container with unsuitable

substances, such as

detergent, as this will cause

irreparable damage to the

water softener system.

1. Remove the lower rack.

2. Unscrew the cap by turning

it counter-clockwise.

3. When first using the

dishwasher: fill the salt

container to the rim with

water.

4. Fill the salt container to the

rim with salt (using the filler

provided) (when filling for

the first time use min. 1.5 kg

and max. 2 kg) and stir with

a spoon handle.

5. Screw the cap back on by

turning it clockwise.

6. Fit the lower rack.

7. If regeneration salt is to be

added, immediately start a

wash programme (rinsing

alone is not sufficient) in

order to eliminate any

residual saline solution

straight away and avoid

corrosion.

Salt level indicator:

The dishwasher is equipped

with an electric or visual salt

level indicator (depending

on the model installed).

Electric indicator:

The salt level indicator lamp

on the control panel lights

up when the salt container is

empty.

Visual indicator:

The float is clearly visible in the

cap window when the salt

container is full.

The float lowers and is no

longer visible when the salt

container is empty.

4gb94056.fm Page 5 Friday, February 7, 2003 5:03 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare