Bauknecht WATK Prime 11716 Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 18)

COLOURS 15°

This option helps protect colours by washing

in cold water (15°C). This option uses less

energy to heat the water while still oering

satisfactory wash results.

Suitable for lightly soiled, unstained garments,

depending on the programme previously

selected.

Note: selecting this option together with the

programme oers wash results comparable

to a 40°C cycle at just 15°C.

DELAY TIMER

To set the selected programme to start at a

later time, press the button to set the desired

delay time. To cancel the delayed start, press

the button again until the value “-- h” is shown

on the display.

INTENSIVE RINSE

Option makes it possible to select the desired

rinse type for sensitive skin. Press the button

once for the “Extra +1” level, which makes it

OPTIONS

! If the selected option is not compatible with

the set programme, an error alarm will sound

and the indicator light will ash three times. The

option is not selected.

possible to select an additional rinse after the

standard cycle rinse and remove all traces

of detergent. Press the button again for the

“Extra +2” level, which makes it possible to

select two additional rinses to the standard

cycle rinses; it is recommended for very

sensitive skin. When the button is pressed for

the third time, the “Extra +3” level is set, thus

allowing the selection of 3 rinses in addition to

the standard cycle’s rinses. The option - started

with cycles at a temperature of 40°C - makes

it possible to remove major allergens such

as pollen, cat and dog hair. With cycles at a

temperature higher than 40° a very good level

of antiallergic protection is achieved. Press the

button again to go back to the “Normal rinse”

rinse type.

If the current adjustment can be neither

set nor changed, the display will show “No

Selection” or “No Change”.

EASY IRON

By selecting this option, the wash and spin

cycles will be modied in order to reduce the

formation of creases.

At the end of the cycle the Washer-dryer drum

will rotate slowly; the START/PAUSE button Led

will ash slowly and the wording “Post care”

will appear on the display. To end the cycle

press the START/PAUSE button.

PROGRAMME Wash type and recommendations Wash

symbols

Settings

WASH&DRY 45’

For washing and drying lightly soiled

garments (Cotton and Synthetics)

quickly. This cycle washes and dries a

laundry load of up to 1 Kg in just 45

minutes.

Max. wash load 1 kg

Max. drying load 1 kg

TeMperaTure 30°C

Max. spin speed max

selecTable opTions Delay Timer

WASH&DRY 90’

For washing and drying cotton and

synthetic bre garments quickly. This

cycle washes and dries a laundry load

of up to 2 Kg in just 90 minutes.

Max. wash load 2 kg

Max. drying load 2 kg

TeMperaTure 30°C

Max. spin speed 1200

selecTable opTions Delay

Timer

MIXED For washing lightly to normally soiled

resilient garments in cotton, linen,

synthetic bres and mixed bres.

Max. wash load 5,5 kg

Max. drying load 5.5 kg

TeMperaTure Cold - 40°C

Max. spin speed 1000

selecTable opTions Delay

Timer, Colours 15°, Easy

Iron, Intensive Rinse, Dry

Only

1) Test programme in compliance with standard EN 50229 (Wash): select the programme with a temperature of 60°C.

2) Long cotton programme: set the programme with a temperature of 40°C.

Test programme in compliance with standard EN 50229 (Drying): the greater load (7kg) must be dried by selecting the dryness level.

The remainder of the load must be dried by selecting the dryness level: the load must consist of 3 sheets and 7 pillowcases.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht WATK Prime 11716 Gebrauchs- und Pflegeanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht WATK Prime 11716