Bauknecht WAPC ZEN 99640 CD Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 42)

Your washing machine is equipped with various

automatic safety and feedback functions. They

enable failures and needed maintenance to be

detected and indicated accordingly.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Washing machine does not start,

no indicators are on

Not connected to mains Insert plug into socket

Socket or fuse does not function Test function with a lamp, have

faulty part repaired

Power breakdown The washing machine will

automatically continue when

power is available again

Washing machine does not start,

although “Start/Pause” has been

pressed

Door not properly closed Push door to close it until it clicks

shut

Key lock is activated Press the button with the key

symbol at least 3 seconds to

deactivate the key lock

The detergent dispenser is not

correctly inserted

Completely push in the detergent

dispenser into the dispenser

compartment

Washing machine stops during

the programme, and “Start/Pause”

blinks

Rinse hold (= positon of spin

button) is activated

Terminate Rinse hold with draining

the water or spinning the laundry

(see “Rinse hold” – FUNCTIONS

AND OPTIONS).

Programme was interrupted,

maybe door has been opened

Make sure door is closed.

Press “Start/Pause” to proceed with

the programme

Safety system has been activated:

failure indicator lights up and/or

display shows failure (F…); water

tap might be closed

Refer to paragraph “Failure

indicators”. Make sure that water

tap is open and inlet hose has no

kinks.

Detergent dispenser contains

detergent residues after

programme end

Inlet water pressure too low; mesh

lter of the water supply hose may

be blocked

Make sure water tap is properly

opened. Check mesh lters of

inlet hose, see CLEANING AND

MAINTENANCE / Cleaning the

mesh lters of the inlet hose

Washing machine vibrates during

spinning

Transport bolts have not been

removed (!)

Remove transport bolts according

to the instructions in the

INSTALLATION GUIDE

Washing machine not standing

level on all four feet

Adjust feet (INSTALLATION

GUIDE). Make sure that washing

machine stands on level and rm

underground.

These failures are frequently so minor that they can

be removed within a few minutes.

When a failure occurs, the sensing indicator in the

middle of the control panel may blink.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht WAPC ZEN 99640 CD Gebrauchs- und Pflegeanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht WAPC ZEN 99640 CD