Bauknecht WAPC 86545 ZEN Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 41)

FAILURE INDICATORS AND MESSAGES

Below is a summary of possible failure causes and

solutions.

If the problem persists after having removed the

origin of the failure, press On/O for at least three

seconds. If afterwards the failure indication still

Failure Indicator

lights up

Display

message

Possible Cause Possible Solution

Open water

tap

No or not sucient water

supply

• Water tap closed

• Kinks in inlet hose

• Water tap pressure too

low

• Mesh lters in inlet hose

clogged

• Water inlet hose frozen

Open water tap

Make sure there are no kinks in the inlet

hose

Make sure water pressure is sucient

Clean mesh lters in inlet hose (CLEANING

AND MAINTENANCE)

Install washing machine at an ambient

temperature of at least 5°C

After problem has been removed, press

Start/Pause. If problem persists, press On/

O for at least 3 seconds.

Water lter

clogged

Waste water is not

pumped out

• Kinks in drain hose

• Drain hose blocked or

frozen up

• Filter blocked

• Pump blocked

Check drain hose for kinks

Install washing machine at an ambient

temperature of at least 5°C

Clean water lter as described in section

CLEANING THE FILTER.

After problem has been removed, press

Start/Pause. If problem persists, press On/

O for at least 3 seconds.

Over

foaming

Excessive foam formation

(maybe by overdosage

of detergent) interrupted

the programme. The

interruption can be

repeated several times

until the foam reduction

is sucient.

Start “Rinse&Spin” programme, with

option Intensive Rinse.

Respect the dosing recommendations by

the detergent manufacturer.

Adjust and use the Dosing Aid function.

Make sure that the water lter is clean.

Load

unbalance

Spin speed

“0” blinks

Unbalance in laundry

load prevented spin

cycle, to protect washing

machine

If you want to spin the wet laundry, add

more laundry items of dierent sizes and

start “Rinse&Spin”.

Avoid small laundry loads consisting of

few big, absorbent pieces of laundry. Wash

dierent sizes of articles in one load.

persists, close the water tap, switch o and unplug

the washing machine and contact our After-Sales

Service.

Indication on control panel Possible Cause Possible Solution

Door open indicator blinks

The door cannot lock Firmly press the door in area of door lock, to pro-

perly close it. Then press Start/Pause. If the problem

persists, press On/O for at least 3 seconds.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht WAPC 86545 ZEN Gebrauchs- und Pflegeanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht WAPC 86545 ZEN