Bauknecht WA ECO 9181 Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 6)

6

Move the appliance without

lifting it by the worktop.

Connect the water inlet

hose(s) to the water supply in

accordance with the regulations

of your local water company.

For models dedicated only for

cold water: Do not connect to the

hot water supply

For models with hot ll: the hot

water inlet temperature must not

exceed 60 °C.

Make sure that the ventilation

openings in the base of your

washing machine (if available on

your model) are not obstructed by

a carpet or other material.

The supply water pressure must

be in range 0.1 -1 MPa.

If you want to place a dryer on

top of your washing machine,

rst contact our After-Sales

Service or your specialist dealer

to verify if this is possible. This

is only admitted if the dryer is

xed on the washing machine by

using an appropriate stacking kit

available through our After- Sales

Service or your specialist dealer.

ELECTRICAL WARNINGS

For installation to comply with

current safety regulations, an

omnipolar switch with minimum

contact gap of 3 mm is required

and the appliance must be

earthed.

If the power cable is damaged,

replace with an identical one.

The power cable must only

be replaced by a qualied

technician in compliance with

the manufacturer instruction

and current safety regulations.

Contact an authorized service

center.

If the tted plug is not suitable

for your socket outlet, contact a

qualied technician.

The power cable must be

long enough to connect the

appliance, once tted in its

housing, to the main power

supply. Do not pull the power

supply cable.

Do not use extension leads,

multiple sockets or adapters.

Do not operate this appliance if

it has a damaged mains cord or

plug, if it is not working properly,

or if it has been damaged or

dropped. Keep the cord away

from hot surfaces.

The electrical components must

not be accessible to the user after

installation.

Do not touch the appliance with

any wet part of the body and do

not operate it when barefoot.

CORRECT USE

Do not exceed the maximum

load allowed. Check the

maximum load allowed in the

programme chart.

Turn o the tap when not in use.

Do not use any solvents (e.g.

turpentine, benzene), detergents

containing solvents, scouring

powder, glass or general purpose

cleaners, and ammable uids;

do not machine wash fabrics that

have been treated with solvents or

ammable liquids.

CLEANING AND

MAINTENANCE

Never use steam cleaning

equipment.

Wear protective gloves for

cleaning and maintenance.

The appliance must be

disconnected from the power

supply before any maintenance

operation.

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare