Bauknecht EW 7F4 Betriebsanweisung PDF herunterladen (Seite 2)

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Anti Stain

The programme is suitable to heavily-soiled garments with resistant

colours. It ensures a washing class that is higher than the standard class (A

class). When running the programme, do not mix garments of dierent

colours. We recommend the use of powder detergent. Pre-treatment with

special additives is recommended if there are obstinate stains.

Whites

heavily soiled whites and resistant colours.

Cotton

lightly soiled resistant and delicate colours.

Eco Cotton

Suitable for washing moderately soiled cotton garments. At 40°C and

60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Anti Allergy Plus

Suitable for removing major allergens such as pollen, mites and cat or

dog hair.

Baby

use the special wash cycle to remove the soiling typically caused by

babies, while removing all traces of detergent from nappies in order to

prevent the delicate skin of babies from suering allergic reactions. The

cycle has been designed to reduce the amount of bacteria by using a

greater quantity of water and optimising the eect of special disinfecting

additives added to the detergent.

Bed & Bath

use programme to wash bed linen and towels in one single cycle: it

optimises softener performance and helps you save time and energy. We

recommend the use of powder detergent.

Fast Wash 60’

For washing normal soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Fast Wash 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Cotton 20°C

the programme ideal for lightly soiled cotton loads. The eective

performance levels achieved at cold temperatures, which are comparable

to washing at 40°, are guaranteed by a mechanical action which operates

at varying speed, with repeated and frequent peaks.

Shirts

use the special wash cycle to wash shirts in dierent fabrics and colours to

guarantee they receive the best possible care.

Wool - Woolmark Apparel Care - Green:

The Wool wash cycle of this machine has been approved

by The Woolmark Company for the washing of wool

garments labelled as “hand wash” provided that the

products are washed according to the instructions on the

garment label and those issued by the manufacturer of

this washing machine (M1126). The Woolmark logo is a

Certication mark in many countries.

Delicates

use programme to wash very delicate garments having strasses or sequins. To

wash silk garments and curtains select the cycle 14 and set the “Sanft” level

from option . We recommend turning the garments inside out before

washing and placing small items into the special bag for washing delicates.

Use liquid detergent on delicate garments for best results.

Rinse

Designed for rinsing and spinning.

Spin & Drain

Designed for spinning and draining the water.

DISPLAY

The display is useful when programming the washing machine and

provides plenty of information.

The duration of the available wash cycles and the remaining time of a

running cycle appear (the display will show the maximum duration of the

cycle chosen, which may decrease after several minutes, since the

eective duration of the programme varies depending on the wash load

and the settings chosen); if the DELAY START option has been set, the

countdown to the start of the selected wash cycle will appear.

Pressing the corresponding button allows you to view the maximum spin

speed and temperature values attained by the machine during the set

wash cycle, or the values selected most recently, if these are compatible

with the set wash cycle.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is o, the door can be opened (wait

approximately 3 minutes).

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the

“Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; the indicator light relative to START/PAUSE

will ash slowly.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- The machine automatically displays the maximum temperature and spin

speed values for the selected cycle, or the most recently used settings if

they are compatible with the selected cycle. Pressing the button

gradually reduces the temperature down to the cold wash “OFF” setting.

Pressing the button gradually reduces the spin speed until it is

completely excluded (“OFF” setting). Pressing the buttons further restores

the maximum allowed values for the selected cycle.

- Select the desired wash cycle.

- Select the desired option.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady and the door will lock ( symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash. To start the wash cycle from the point at which it

was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot

be opened. While a wash cycle is running, the door remains locked. To

open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE button to pause the cycle; the

indicator light will ash. If the symbol is not lit, the door may be

opened (wait approximately 3 minutes). Press the START/PAUSE

button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash),

then select the desired cycle and press the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “END” on the display; when the

symbol switches o, the door may be opened (wait approximately 3

minutes). Open the door, unload the laundry and switch o the machine.

If you do not press ON/OFF button, the washing machine will switch

o automatically after about a half of an hour.

OPTIONS

- If the selected option is not compatible with the set wash cycle, the

indicator light will ash and the option will not be activated.

Prewash

Allows you to perform a prewash.

Delay start

To set a delayed start for the selected cycle, press the corresponding

button repeatedly until the desired delay period is reached. When this

option has been activated, the symbol lights up on the display. To

remove the delayed start setting, press the button until “OFF” appears on

the display.

Temperature

Each wash cycle has a pre-dened temperature. To modify the

temperature, press the button. The value will appear on the display.

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht EW 7F4 Betriebsanweisung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Bauknecht EW 7F4