Bauknecht KGNF20P A3+ PLATIN Gebrauchs- und Pflegeanleitung PDF herunterladen (Seite 16)

16

After a power blackout, your product

is designed to automatically monitor

the temperature in the freezer when

electricity is resupplied. If the

temperature in the freezer rises above

freezing level, the Black Out indicator

lit the Alarm indicator blinks and the

acoustical alarm sounds when

electricity is re-supplied. To reset the

alarm press the Reset Alarm button

just once.

In case of Black Out Alarm, the

following actions are recommended:

• If the food in the freezer is unfrozen

but still cold, all the food in the

freezer should be moved to the

fridge compartment and eaten

within the next 24 hours.

• If the food in the freezer is frozen,

this indicates the food was thawed

and then refrozen when electricity

was re-supplied which degrades

taste, quality and nutritional value

and also could be unsafe. It is

recommended to not consume the

food but to dispose of the entire

content of the freezer.

The Black Out Alarm is designed to

provide guidance on food quality in

the freezer in the event of electricity

black out.

This system does not guarantee food

quality or safety and consumers are

advised to use their own judgment in

evaluating food quality in freezer and

refrigerator compartments.

BLACK OUT ALARM

Freeze Control is an advanced

technology that reduces temperature

uctuations in the whole freezer

compartment to minimum, thanks to

an innovative air system, totally

independent from the fridge. Freeze

burns are reduced up to 60% and food

preserves its original quality and color.

To activate/deactivate the Freeze

Control function press and hold for 3

seconds the Party Mode button.

The function works properly in a

dened range of temperature:

between ‐22°C and ‐24°C. When the

function is engaged and the current

temperature in the freezer is set to the

warmer set point than ‐22°C, the

temperature is automatically set to

‐22°C to match the working range.

If the function is engaged and the

user modify the freezer temperature

out of the working range, the function

is automatically switched o.

In case of Fast freezing is engaged, the

function “Freeze control” is inhibited

until the Fast Freezing function

switched o.

FREEZE CONTROL

Temperature LEDs blinks. The alarm is

activated when:

• The appliance is connected to the

power supply after prolonged

disuse

• The freezer compartment

temperature is too high

• The quantity of foods loaded into

the freezer exceeds that indicated

on the rating plate

• The freezer door has been left

open for a long time

• To mute the alarm buzzer press

Reset button just once.

• The Alarm indicator is automatically

turned-o as soon as the freezer

compartment reaches a

temperature below - 10°C and the

Freezer Temperature LEDs stop

blinking and shows the chosen

setting.

OVER TEMPERATURE

ALARM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare