Bauknecht WLMG 1010 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 8)

18

TROUBLESHOOTING GUIDE

1. The appliance is not working.

•Is there a power failure?

•Is the plug properly inserted in the socket?

•Is the double-pole mains switch on?

•Has the fuse blown?

•Is the power cord damaged?

•Is the thermostat set to z (Stop)?

2. The internal temperature is not low

enough.

•Is the door shut properly?

•Are the bottles preventing the door from

closing properly?

•Is the appliance installed near a heat source?

•Is the thermostat setting correct?

•Are the air circulation vents blocked?

3. The temperature inside the wine

cellar is too low.

•Is the thermostat setting correct?

4. The appliance is excessively noisy.

•Has the appliance been installed correctly?

•Are the pipes at the back touching or

vibrating?

5. Water collects at the bottom of the

cellar.

•Is the defrost water drain blocked?

Notes:

Gurgling and hissing noises due to expansion

in the refrigerant circuit are normal.

AFTER-SALES SERVICE

Before contacting the After-sales Service:

1. check first if you can solve the problem by

yourself (see “Troubleshooting guide”).

2. Switch the appliance on again to see if the

problem recurs. If it does, disconnect the

appliance from the power supply and wait for

about an hour before switching it on again.

3. If the problem persists after this course of

action, contact After-sales Service.

Specify:

•the nature of the problem,

•the model,

•the Service number (the number after the

word SERVICE on the data plate on the inside

of the appliance),

•your full address,

•your telephone number and area code.

Note:

The direction of door opening can be changed.

If this operation is performed by After-sales

Service it is not covered by the warranty.

41133001GB.fm Page 18 Thursday, October 28, 2004 12:07 PM

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare