Bauknecht TK Premium 95A2 I Gebrauchs- und Pflegeanleitung

www.bauknecht.eu/register Health & Safety, Use & Care and Installation guide

10PRODUCT DESCRIPTIONAPPLIANCECONTROL PANEL1. Worktop2. Control panel3. Water tank4. Door5. Door handle6. Door lter (behind door) 7. Bottom lter (

11ENDOORDRUM LIGHT (if available)AVAILABLE ACCESSORIES To open the door, pull the handle.If you interrupt a running programme by opening the door, th

12FIRST TIME USEHOW TO USE THE APPLIANCE1. CHECK WATER TANKMake sure that the water tank is correctly inserted2 . CHECK DRAIN HOSEMake sure that the

13ENDAILY USE WARNINGMake sure that no lighters or matches are left in clothing. Make sure that the laundry is not soaked with ammable liquids.1. LO

14Set dryness level, if needed If you want to change the dryness level, make sure that the Dryness level button « lights up. Turn the knob to sele

15ENend, the dryer will tumble the laundry for about 10 minutes, to prevent creasing. The display shows an animation.9. EMPTY WATER TANK / CLEAN DOOR

16PROGRAMME Type of Wash and RecommendationsCare LabelsRegulationsSYNTHETICSFor drying laundry made of synthetic bres.max. load (kg): 3.5default p

17ENPROGRAMME Type of Wash and RecommendationsCare LabelsRegulationsSTEAM REFRESHFor refreshing laundry with steam. Specically designed to refresh

18This accessory is designed to be used:With Water: in programme Steam Refresh, to provide the necessary humidityREFRESHING BALLUSE WITH PROGRAMME STE

19ENSTEAM OPTIONFRESH CAREGENTLEDRYING TIME OPTIONDRYNESS LEVELMinimises creasing of garments made of cotton, synthetics and their blends by adding a

2ENGLISH ...3

20FUNCTIONSON/OFFKNOBSTART/PAUSEKEY LOCKSTART DELAYTo switch the dryer on: press the button until the Start/Pause button lights up. To switch the drye

21ENThe programme starts automatically at the end of the delay period. On programme start, the delay on the display is replaced by the remaining progr

22INDICATORSWATER TANK FULL => empty water tankBOTTOM FILTER CLOGGED=> clean bottom lterDOOR FILTER CLOGGED=> clean door lterFAILUREF..For

23ENENERGY SAVING TIPS• To reduce the drying time, make sure that the laundry is spun with the maximum possible spin speed of the wash programme. Thi

24CLEANING & MAINTENANCEEMPTYING THE WATER TANKEmpty the water tank after each programme, provided the drain hose is not connected to your sewage

25ENClean the door lter after each programme.Make sure that the laundry is unloaded. Open the door.1. Remove the door lter by pulling it upwards. 2.

264. Clean the lter foam and the lter by hand or under running water. Do not wash the lter foam in the washing machine.5. Carefully wring out the 

27EN8. Insert the bottom lter again. Make sure that it is completely integrated in the lter compartment.9. Clap the lter handle downwards.10. Close

28CLEANING THE OUTSIDE OF THE DRYERUse a soft damp cloth to clean the outer parts of the dryer.Do not use glass or general purpose cleaners, scouring

29ENREVERSING THE DOOR STOPIf needed, the door stop of the dryer door can be reversed. Use pliers and a cross-head screwdriver for the procedure. For

3ENENGLISHHEALTH & SAFETY, USE & CARE and INSTALLATION GUIDESHealth and Safety guideSAFETY INSTRUCTIONS ...

305. Fix the door on the left side by turning in the 2 screws. Take care to screw them in vertically, to avoid pinching o the door seal.6. Insert the

31ENYour dryer is equipped with various automatic safety functions. These enable failures to be detected in good time and the safety system can react

32Problem Possible Cause SolutionWATER DROPLETS ARE BENEATH THE DRYERBottom lter not inserted correctly• Check position of the bottom lter and make

33ENFAILURE INDICATOR AND MESSAGESMake sure to • Empty the water tank after each programme• Clean the door lter after each programme• Clean the bo

34Below is a summary of possible failure causes and solutions. If the problem persists after having followed the instructions as indicated below, pres

35ENTRANSPORT AND HANDLING1. Unplug the dryer.2. Make sure that door and water tank are properly closed.3. If the drain hose is connected to your sewa

36AFTER-SALES SERVICEBEFORE CALLING THE AFTER-SALES SERVICEIF AFTER THE ABOVE CHECKS THE FAILURE STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER-S

37EN2a. 2b.1.

383a.3b.max 2 cmmax 0.79 inch

39EN4.max 100 cm39 inch12

4FUNCTIONS ...20INDICATORS ...

5.6a.6b... xxx V ~ xx Hz xx A IPX4 EV Dxxxx xxxx xxxxBauknecht® Registered trademark of Whirlpool group of companiesEN400010798840001n

5ENSAFETY INSTRUCTIONSIMPORTANT TO BE READ AND OBSERVEDBefore using the dryer carefully read, Health and Safety and Use and Care guides.Keep these in

6The last phase of the drying cy-cle is done without heat (cool down phase), to assure that the laundry stays at a temperature level which is not lead

7ENcolour embossed in words on the base of the plug.Replacement fuse covers are available from your local elec-trical store.For the Republic of Irelan

8SCRAPPING OF HOUSEHOLD APPLIANCESWhen scrapping the dryer, make it unusable by cutting o the power cable and removing the doors and shelves (if pre-

9ENDECLARATION OF CONFORMITYThis dryer has been designed, constructed and distributed in compliance with the safety requirements of European Directiv