8
Use & Care guide
SOUNDS PRODUCED DURING OPERATION
Hobs may produce noises during normal operation.
During the pot recognition phase, the hob produces a click sound, while
during cooking, hissing or crackling sounds may be heard. Hisses and
crackles actually come from the pots, and are produced by specic
features of the base of the pot being used (for example, when a base is
made from several layers of material, or is irregular). These noises may
vary depending on the accessories used and the amount of food that
these contain, and do not indicate any type of defect.
TROUBLESHOOTING
• Check that the electricity supply has not been shut o.
• If you are unable to turn the hob o after using it, disconnect it from
the power supply.
• If alphanumeric codes appear on the display when the hob is
switched on, consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate the
control panel lock function.
MAINTENANCE AND CLEANING
WARNING
• Do not use steam cleaning equipment.
• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H”) is not displayed.
Important:
• Do not use abrasive sponges or scouring pads as they may damage
the glass.
• After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
• Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a special hob cleaner
(follow the Manufacturer’s instructions).
• Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
• After cleaning the hob, dry thoroughly.
Error code Description Possible causes Cure
C81, C82 The control panel switches o
because of excessively high
temperatures.
The internal temperature of
electronic parts is too high.
Wait for the hob to cool down
before using it again.
F02, F04
The connection voltage is wrong. The sensor detects a discrepancy
between the appliance voltage
and that of the mains supply.
Disconnect the hob from the
mains and check the electrical
connection.
F01, F06, F12, F13,
F25, F34, F35, F36,
F37, F41, F47, F58, F61,
F76
Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
(16 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern