Bauknecht CTAC 6740 FS BA Bedienungsanleitung PDF herunterladen (Seite 6)

Use & Care guide

FIRST TIME USE

DAILY USE

HOW TO USE THE APPLIANCE

ACCESSORIES

SWITCHING THE HOB ON/OFF

To turn the hob on, press the power button for around 1 second. To turn

the hob o, press the same button again, and all cooking zones will be

deactivated.

POSITIONING

Locate the desired cooking zone by referring to the position symbols at

the bottom of each slide touchscreen.

Do not cover the control panel symbols with the cooking pot.

Please note: In the cooking zones close to the control panel, it is advisable to

keep pots and pans inside the markings (taking both the bottom of the pan

and the upper edge into consideration, as this tends to be larger).

This prevents excessive overheating of the touchpad. When grilling or

frying, please use the rear cooking zones wherever possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING

POWER LEVELS

To activate the cooking zones:

Move your nger horizontally across the slide touchscreen (SLIDER) of

the cooking area you have selected. Above the slide touchscreen, the

corresponding power level will appear. Using the slide touchscreen, you

can also select the quick heating function (

To deactivate the cooking zones:

Select the “OFF” button on the top of the slide touchscreen.

CONTROL PANEL LOCK

To clean the hob, lock the settings and prevent it being switched on

accidentally, press and hold the OK/lock button for 3 seconds. A beep

and a warning light above the symbol indicate that this function has

been activated. The control panel is locked, with the exception of the

“o” function. To unlock the controls, repeat the activation procedure.

TIMER

There are two timers - one controls the left-hand cooking zones, while

the other controls the right-hand cooking zones.

To activate the timer:

Press the

button to set the desired time on the cooking zone in

use. Once the set time has elapsed, a beep will sound, and the cooking

zone will switch o automatically.

The time can be changed at any point.

To deactivate the timer:

Press the

buttons together until the timer is deactivated.

POTS AND PANS

Only use pots and pans made from ferromagnetic

material which are suitable for use with induction

hobs. To determine whether a pot is suitable, check

for the

symbol (usually stamped on the bottom).

A magnet may be used to check whether pots are

magnetic.

The quality and the structure of the pot base can alter cooking performance.

Some indications for the diameter of the base do not correspond to the

actual diameter of the ferromagnetic surface.

Empty pots or pots with a thin base

Do not use empty pots or pans when the hob is on. The hob is equipped

with an internal safety system that constantly monitors the temperature,

NOOK

activating the “automatic o” function where high temperatures are

detected. When used with empty pots or pots with thin bases, the

temperature may rise very quickly, and the “automatic o” function may

not be triggered immediately, damaging the pan or the hob surface. If this

occurs, do not touch anything, and wait for all components to cool down.

If any error messages appear, call the service centre.

Minimum diameter of pot/pan base for the dierent cooking areas

OFF OFF

OFF

Max

MinMed

OFF

Max

MinMed

Max

MinMed

Max

MinMed

100 mm 130 mm 180 mm150 mm

SETTING THE POWER

At the time of purchase, the hob is set to the maximum possible power

(nL). The maximum power level (nL) is printed on the identication plate

on the bottom of the hob.

To set the power of the hob:

Once you have connected the device to the mains power supply, you

can set the power level within 60 seconds.

Press the

button for at least 3seconds. On the screen, the symbol

will be displayed.

Press the

button until the last power level selected appears.

Use the

and

buttons to select the desired power level. The power

levels available are: 2.5 kW – 4.0 kW – 6.0 kW – 7.2 kW.

Conrm by pressing

The power level selected will stay in the memory even if the power

supply is interrupted.

To change the power level, disconnect the appliance from the mains for

at least 60 seconds, then plug it back in and repeat the steps above.

If an error occurs during the setting sequence, the

symbol will

appear, and you will hear a beep. If this happens, repeat the operation.

If the error persists, contact the After-Sales Service.

TURNING THE BEEP ON/OFF

To activate/deactivate the beep:

Switch on the hob.

Press the

button on the rst left-hand slide touchscreen for 3seconds.

Any alarms set will remain active.

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Bauknecht CTAC 6740 FS BA Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küchen- und Haushaltswarenzubehör Bauknecht CTAC 6740 FS BA