Bauknecht KGLF 17 A2+ IN Gebrauchs- und Pflegeanleitung Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
5
EN
WARNING
Keep ventilation openings, in
the appliance enclosure or in
the built-in structure, clear of
obstruction.
WARNING
Automatic ice-makers and/or
water dispensers must be
connected to a water supply
that delivers potable water
only, with main water pressure
between 0,17 and 0,81 MPa (1,7
and 8,1 bar).
To guarantee adequate ventila-
tion, leave a space on both
sides and above the appliance.
The distance between the rear
of the appliance and the wall
behind the appliance should
be at least 50mm.
A reduction of this space will
increase the Energy consump-
tion of product.
INTENDED USE
OF THE PRODUCT
This appliance is designed
solely for use as domestic
usage. To aim the appliance as
professional use is forbidden.
The manufacturer declines
allresponsibility for innapropi-
ate use or incorrect setting of
the controls.
The appliance is not intended
to be operated by means of an
external timer or separate
remote control system.
Do not use the appliance
outdoors.
This appliance is intended to
be used in household and
similar applications such as:
– sta kitchen areas in shops,
oces and other working
environments;
– farm houses and by clients in
hotels, motels and other resi-
dential type environments;
– bed and breakfast type
environments;
– catering and similar non-
retail applications.
The bulb used inside the appli-
ance is specically designed for
domestic appliances and is not
suitable for general room
lighting within the home (EC
Regulation 244/2009).
INSTALLATION
Only activate the appliance
when the installation proce-
dure has been completed.
Installation and repairs must
be carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part
of the appliance unless speci-
cally stated in the user manual.
Use protective gloves to per-
form all unpacking and instal-
lation operations.
The appliance must be discon-
nected from the power supply
before carrying out any instal-
lation operation.
After unpacking the appliance,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest
After-sales Service.
During installation, make sure
the appliance does not dam-
age the power cable.
The appliance must be han-
dled and installed by two or
more persons.
When installing the appliance
make sure that the four feet are
stable and resting on the oor,
adjusting them as required,
and check that the appliance is
perfectly level using a spirit
level.
Wait at least two hours before
switching the appliance on, to
ensure that the refrigerant
circuit is fully ecient.
Make sure the appliance is not
near a heat source.
ELECTRICAL WARNINGS
Make sure the voltage speci-
ed on the rating plate corre-
sponds to that of your home.
The power supply ranges are
indicated on the rating plate.
Regulation require that the
appliance is earthed.
For installation to comply with
current safety regulations, an
omnipolar switch with mini-
mum contact gap of 3mm is
required.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in compli-
ance with the manufacturer
instruction and current safety
regulations. Contact an author-
ized service center.
The electrical components
must not be accessible to the
user after installation.
The power cable must be long
enough for connecting the
Seitenansicht 4
1 2 3 4 5 6 7 8 9 10 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare