EN -1-
Bauknecht is a registered trademark
Chart
(see at right for options description)
PROGRAM SELECTION
BUTTON
Push “P” button (repeatedly)
until selected program number
is shown on the display
(P1...Px) - see “Table of
programs” below.
START/RESUME BUTTON
Push this button to start the selected program: the
indicator lights up and goes off at the end of the
program.
When the door is opened during a washing cycle,
the cycle is temporarily paused: the Start indicator
blinks. To resume the cycle close the door and
push Start button again.
CANCEL/OFF BUTTON
Push this button to switch off the control panel.
If pressed when a program is running it cancels the
program ongoing draining water for 1 minute
(0:01 is shown into the display).
If pressed when the dishwasher is switched off, it
drains any possible liquids from dishwasher
(1 minute process).
1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without any options) and may vary depending on conditions.
Differences of up to 20 minutes are possible with sensor programs as a result of the appliance’s automatic calibration system.
2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on the EN/Standard loading
comparison test and other tests, contact the following address: “contact_bk@bauknecht.com”.
* Power consumption in: Left-on mode: 1.08 W / Off-mode: 0.40 W.
Table of programs
Deter-
gent
Consumption
Drying
Phase
Programs
Available
options
Loading instructions
Litres kWh
Minutes
1)
P1
Sensor
PowerClean
®
Plus
40°-70°C
Delay
Antibacterial
rinse
PowerClean
®
Use for normal soiled dishes with dried-
on food. Senses the level of soiling on the
dishes and adjusts the program
accordingly. When the sensor is detecting
the soil level an animation appears in the
display and the cycle duration is updated.
The PowerClean
®
option is activated
automatically with this program.
To deactivate, press the PowerClean
®
button on the control panel.
X 7-15 1.00-1.70 70-172 Full
P2
Pre-wash cold
Delay Crockery to be washed later.
— 4.0 0.01 14-16 NO
P3
Glass 40°C
Delay Light soiling, for example glasses and cups.
X 10.5 0.85 105-114 Light
P4
Express 45°C
Delay
Lightly soiled crockery, with no dried-on
food.
X 11.0 0.85 30-50 NO
P5
Eco
2)
50°C
Delay
Antibacterial
rinse
PowerClean
®
Normally soiled crockery.
Standard program, the most efficient in
terms of its combined energy and water
consumption.
X 9.0 0.92 240 Full
P6
Normal 60°C
Delay
Antibacterial
rinse
Normally soiled crockery.
X 11.0 1.30 80-95 Full
P7
Night
39 dBA
50°C
Delay
Normally soiled crockery, gentle and quiet
thanks to the lower spray pressure.
X 14.0 1.20 290-299 Light
P8
All in 1
Delay
Antibacterial
rinse
PowerClean
®
This program is able to manage different
wash intensity for each rack. You can
optimize loading and properly wash
different crockery in one cycle, loading
delicate items in upper rack and pots and
pans in lower rack.
X 15.0 1.50 155-170 Full
5019 400 00786
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS
QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
Options and display description
SALT INDICATOR
When lit (at the end of the cycle),
the salt reservoir needs to be
refilled.
RINSE AID INDICATOR
When lit (at the end of the cycle),
the rinse aid dispenser needs to
be refilled.
WASH TIME DISPLAY
Indicated the cycle duration and the remaining time (h:min). With “Delayed start” selected it indicates
the time remaining until program start (h.00) - below 1h (0:min).
If “Fx Ey” messages appears on the display, see page 6 - chapter “What to do if...”.
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY
BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES
AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
POWERCLEAN
®
Thanks to the additional power
jets this option provides a more
intensive and powerful wash in
the lower rack, in the specific
area. This option is
recommended for washing pots
and casseroles (see page 4). Press
this button to activate
PowerClean
®
(the indicator lights
up). For non PowerClean
®
loading to achieve best cleaning
performances and resources
optimization, PowerClean
®
should be switched off.
TABLET SETTING
This setting allows to
optimize the cycle
performances according
the type of detergent used.
Push the Tablet button for
3 seconds (until the
indicator lights up) if you
are using the combined
detergents in tablet (rinse
aid, salt and detergent in 1
dose).
If you are using powder
detergent or liquid
detergent, the Tablet
indicator on the control
panel has to be off.
DELAYED START
BUTTON
Push the button
(repeatedly) to delay the
start of the program.
Adjustable from 1 to
24 hours. With each press
of the button, the delayed
start indicator increases by
one hour and after
24 restarts from 0. Then
press the START button.
The dishwasher will start
after the set time.
ANTIBACTERIAL RINSE
This function activates an antibacterial rinse
at the end of the wash cycle, guaranteeing
a further reduction of bacteria. Press the
button to activate or deactivate the
function. This function can be used with the
programs indicated in the table of
programs. The dishwasher door must be
kept shut for the entire duration of the
program in order to guarantee reduction of
bacteria. If the door is opened the indicator
lamp starts flashing.
Quick reference guide
(12 Seiten)
(12 Seiten)
(8 Seiten)
(8 Seiten)
(8 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern