Bauknecht GCX 4862 Bedienungsanleitung PDF herunterladen (Seite 53)

Cleaning the Spray Arms

It is necessary to clean the spray arms regularly for hard water chemicals

will clog the spray arm jets and bearings.

To remove the upper spray arm, hold the nut, rotate the arm clockwise

to remove it.

To remove the lower spray arm, pull out the spray arm upward.

Wash the arms in soapy and warm water and use a soft brush to clean the

jets. Replace them after rinsing them thoroughly.

How to Keep Your Dishwasher in Shape

• After Every Wash

After every wash, turn off the water supply to the appliance and leave the door slightly open so that

moisture and odours are not trapped inside.

• Remove the Plug

Before cleaning or performing maintenance, always remove the plug from the socket.

• No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning

products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of the

interior, use a cloth dampened with water and a little vinegar, or a cleaning product made specifically

for dishwashers.

• When not in Use for a LongTime

It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from

the socket, turn off the water supply and leave the door of the appliance slightly open. This will help

the door seals to last longer and prevent odours from forming within the appliance.

• Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be

positioned on its back.

• Seals

One of the factors that cause odours to form in the dishwasher is food that remains trapped in the

seals. Periodic cleaning with a damp sponge will prevent this from occurring.

Open

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 131 132

Keine Kommentare

Bauknecht GCX 4862 Bedienungsanleitung Seite 53